Nissan 370Z Forum - View Single Post - Goodridge SS Brake line Upgrade: Flush/Bleeding Issues

JSBZ · 12-20-2009, 11:13 AM

Yesterday, I installed a set of Goodridge SS lines, Ferodo 2500 pads and Motul 600 fluid. I cannot get the pedal to firm up. I purged the system before cracking open the lines and then bled the system twice using a Motive power bleeder (15psi) after install. I am not getting any air bubbles showing in the fluid.
I didn't disable the ABS (manual says to disable) until the second bleed but it didnt seem to matter.
Any ideas?
BTW, ss kit was quality, easy to install and fit perfect.

12-20-2009, 11:13 AM	#1 (permalink)
JSBZ Base Member Join Date: Jun 2009 Location: Colorado Posts: 56 Drives: 09 370Z T/S 6MT Rep Power: 15	Goodridge SS Brake line Upgrade: Flush/Bleeding Issues Yesterday, I installed a set of Goodridge SS lines, Ferodo 2500 pads and Motul 600 fluid. I cannot get the pedal to firm up. I purged the system before cracking open the lines and then bled the system twice using a Motive power bleeder (15psi) after install. I am not getting any air bubbles showing in the fluid. I didn't disable the ABS (manual says to disable) until the second bleed but it didnt seem to matter. Any ideas? BTW, ss kit was quality, easy to install and fit perfect.