Nissan 370Z Forum - View Single Post

laytonanthony · 10-14-2015, 04:32 PM

Hi Guys
Had my engine re-built and engine builder didn't align the control shaft on the VVEL.
Rang my local Nissan dealer and they wanted £2,000.00 for one actuator.
I can re-use my existing actuators but obviously need to align them up.
Nobody in the UK has a zed that has seen the mileages over here in the US so work on the Vq37vhr engines has been to a very minimum.

If I could locate or find the 2x little plastic holding jigs it would make my life so much easier. Does anybody have any or know where could get them from?

Thanks in advance.
Anthony

10-14-2015, 04:32 PM	#1 (permalink)
laytonanthony Base Member Join Date: Jun 2015 Location: england Posts: 22 Drives: Nissan 370z Rep Power: 9	VVEL Actuator Holding Jigg!!!! Hi Guys Had my engine re-built and engine builder didn't align the control shaft on the VVEL. Rang my local Nissan dealer and they wanted £2,000.00 for one actuator. I can re-use my existing actuators but obviously need to align them up. Nobody in the UK has a zed that has seen the mileages over here in the US so work on the Vq37vhr engines has been to a very minimum. If I could locate or find the 2x little plastic holding jigs it would make my life so much easier. Does anybody have any or know where could get them from? Thanks in advance. Anthony