Nissan 370Z Forum - View Single Post - Stillen air to air conversion fabrication thread

EVOHUNTER · 08-18-2015, 12:41 PM

8psi stillen pulley, I'm also bringing the 9psi pulley, if there's more room in terms of fuel supply, ill put on the 9PSI.
3.2 jackshaft
2.75 sc
Standard impellar
**94 octane**
600cc injectors
255 pump

I have a feeling ill be around 10 psi, but only time will tell

I wonder if the boost will come on a lot lower in the rpm with the smaller pulley?

08-18-2015, 12:41 PM	#159 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 14	8psi stillen pulley, I'm also bringing the 9psi pulley, if there's more room in terms of fuel supply, ill put on the 9PSI. 3.2 jackshaft 2.75 sc Standard impellar 94 octane 600cc injectors 255 pump I have a feeling ill be around 10 psi, but only time will tell I wonder if the boost will come on a lot lower in the rpm with the smaller pulley? __________________ Last edited by EVOHUNTER; 08-18-2015 at 12:45 PM.