Nissan 370Z Forum - View Single Post - DIY: Oil Cooler (scratch built install, lottsa pics).....>.

TheFLiP · 07-25-2015, 02:11 PM

I have installed this mod on my '12 manual. It's been installed for about 5,500 miles now but I've noticed, while driving the tail of the dragon that my temps were right up at 220. Even with some high-rev aggressive driving, I can easily get the temp to 210.

I did install the stillen G3 intake, HFC, and exhaust as well as a uprev tune pushing the car to about 320 whp on a hot day (it was tuned on a hot day ~90F).

I'm thinking about bumping up the cooler size to keep the temps down a bit more. Any ideas? Thanks

07-25-2015, 02:11 PM	#286 (permalink)
TheFLiP Base Member Join Date: Dec 2014 Location: El Paso, TX Posts: 39 Drives: 12 370zSport BLK M6 Rep Power: 6720	I have installed this mod on my '12 manual. It's been installed for about 5,500 miles now but I've noticed, while driving the tail of the dragon that my temps were right up at 220. Even with some high-rev aggressive driving, I can easily get the temp to 210. I did install the stillen G3 intake, HFC, and exhaust as well as a uprev tune pushing the car to about 320 whp on a hot day (it was tuned on a hot day ~90F). I'm thinking about bumping up the cooler size to keep the temps down a bit more. Any ideas? Thanks