Quote:
Originally Posted by AnthonyD1978
Lol, way easier just to use EcuTek. This doesn't do anything for idle learn either.
|
Ha ha ha ! This is for ECU reset,
Here is the idle relearn.
-warm the engine.
-Confirm that accelerator pedal is fully released, turn ignition switch "ON"? and wait 3 seconds.
-Repeat the following procedure quickly five times within 5 seconds.
a. Fully depress the accelerator pedal.
b. Fully release the accelerator pedal.
-Wait 7 seconds, fully depress the accelerator pedal and keep it for approx. 20 seconds until the MIL stops
blinking and turned ON.
-Fully release the accelerator pedal within 3 seconds after the MIL goes ON.
-Start engine and let it idle.
-Wait 20 seconds.