Hi guys
I own 2 nissan 370z's. A coupe and a vert. My coupe got starved of oil and I had to have the engine rebuilt. The engine builders replaced all bearings, piston rings and a new crank.
We have fitted the engine and struggled to get it to start to then realise the vvel sensors were not set. I set these with consult 3 to 0.500v. With a bit of peddle then the engine fired and bedded all the piston rings in ect. The car will idle fine but has no throttle response and when given some gas will seem to miss. Also car will not go over 3500rpm (limp mode). Consult 3 gave 2 codes, P0011, P0021. INT/V TIM B1, INV/T TIM B2.
i have checked the timing solenoid and cam sensors. All fine. My engine builders is 100% confident it's timed properly. I know these engines rely on oil pressure.
Any suggestions would be greatfull. I'm at my last tether with it!
Ant.
Sent from my SM-N910F using Tapatalk