Quote:
Originally Posted by Titan1080
What kit are you going with? The lines with the Stillen kit I don't think are long enough to get the cooler far enough to the driver side without obstructing that sensor, at least with the way I oriented the filter sleeve. Vipor in his write-up put a cooler together from off-the-shelf parts and went through the radiator support instead of around and is well clear of the sensor.
|
Fwiw, I followed the diy in the link below and my Stillen 24 row sits on the driver side - missing the sensor. ☺ I know your post is a few months old.
(drilled radiator support)
DIY: stillen 24 row oil cooler on driver side