Quote:
Originally Posted by jrb55gh
One more feature request to evaluate:
Fabricate the top horizontal plate baffle to overhang the outer edges of the vertical baffles in the pan by about 0.75" to help prevent oil from rolling over the top of the vertical baffles in high G turns.
|
I had considered extending out a little bit for the purpose of promoting the outside oil to use the baffles rather than the top, due to wondering if this might work better for the oil pickup.
What if instead of extending the horizontal plate out to the sides more, we had it take a 90 degree turn upward for that 0.75"? Than perhaps some small openings at the base of it to allow oil in the middle against this new vertical wall a place to pass-through to underneath the plate?
What are your thoughts on that?