Nissan 370Z Forum - View Single Post

Etzio · 04-21-2015, 11:32 AM

So this past weekend I installed a Takeda long tube intake, Berk Tesp Pipes (non res) and JWT flywheel.

So anytime I get around 2500-3000k RPMS during acceleration and decel, I get a bad Rattle noise, Then it smooths out and and sounds as it should.

So I can tell the difference between the hiss on decel, the normal rasp of non res pipe during accel, and the jitter from the flywheel on low RPM, but this rattle sound I cannot figure out. Any one experience anything similar? I'll try to get a video later.

04-21-2015, 11:32 AM	#1 (permalink)
Etzio Base Member Join Date: Dec 2014 Location: Jacksonville Posts: 101 Drives: 09 Nissan 370Z Rep Power: 10	bad noise after Berk TP install So this past weekend I installed a Takeda long tube intake, Berk Tesp Pipes (non res) and JWT flywheel. So anytime I get around 2500-3000k RPMS during acceleration and decel, I get a bad Rattle noise, Then it smooths out and and sounds as it should. So I can tell the difference between the hiss on decel, the normal rasp of non res pipe during accel, and the jitter from the flywheel on low RPM, but this rattle sound I cannot figure out. Any one experience anything similar? I'll try to get a video later. Last edited by Etzio; 05-15-2015 at 12:25 PM.