Nissan 370Z Forum - View Single Post

AntiVenom · 04-15-2015, 07:12 AM

Alright...

I have been painstakingly working my way through threads, doing research, etc. I am 99% the setup will work, but would love to get some input from the forum.

Wheels - Forgestar F14s
20x9.5" +20
20x11" +20

Michelin PSPs
265/35r20 which is 27.3" diameter
305/30r20 which is 27.2" diameter

Looking at Jay_D's car for inspiration he is running 315/30r20 in the rear with this same offset. As noted above the plan is to run 305/30r's Michelin PSPs which as I understand it run a bit narrower than other 305s. Also the diameter should fit as it is slightly smaller than Jay_Ds. So the concern isn't about rear fitment.

My concern is whether or not I will be able to stuff that 27.3" in the front without rubbing. I would like to run around 2* camber in the front. The ride height can be dialed in since I will be on HKS coils. Thoughts?

Thanks!

04-15-2015, 07:12 AM	#1087 (permalink)
AntiVenom Track Member Join Date: Nov 2014 Location: North Carolina Posts: 695 Drives: 2011 KAD 6MT Rep Power: 11	Alright... I have been painstakingly working my way through threads, doing research, etc. I am 99% the setup will work, but would love to get some input from the forum. Wheels - Forgestar F14s 20x9.5" +20 20x11" +20 Michelin PSPs 265/35r20 which is 27.3" diameter 305/30r20 which is 27.2" diameter Looking at Jay_D's car for inspiration he is running 315/30r20 in the rear with this same offset. As noted above the plan is to run 305/30r's Michelin PSPs which as I understand it run a bit narrower than other 305s. Also the diameter should fit as it is slightly smaller than Jay_Ds. So the concern isn't about rear fitment. My concern is whether or not I will be able to stuff that 27.3" in the front without rubbing. I would like to run around 2* camber in the front. The ride height can be dialed in since I will be on HKS coils. Thoughts? Thanks! __________________ The GREY GHOST Chronicle instagram: jdmunilla Last edited by AntiVenom; 04-15-2015 at 07:23 AM.