Nissan 370Z Forum - View Single Post

Merv · 03-19-2015, 08:32 AM

Without front and rear camber arms,I was able to get my camber to 1.7 in the front and 2.5 in the rear + or - a point. Toe was able to be brought in to factory specs. This was on a swift spring drop. Point is you don't nessessarily need the camber arms and those offsets would be ideal for a decent flush fit (depends on your own interpretations).

03-19-2015, 08:32 AM	#11 (permalink)
Merv Track Member Join Date: Dec 2013 Location: Vancouver B.C Posts: 518 Drives: 11 GM grey sport tou Rep Power: 14	Without front and rear camber arms,I was able to get my camber to 1.7 in the front and 2.5 in the rear + or - a point. Toe was able to be brought in to factory specs. This was on a swift spring drop. Point is you don't nessessarily need the camber arms and those offsets would be ideal for a decent flush fit (depends on your own interpretations). __________________ Swift springs \| upgraded headlights \| stillen gen3 cai \| FI HFC's and FI CBE \| ecutek tune in the mail!