I did not see what was looking for with the obligatory search...
Question: (I've run a few setups with brakes at the track but am still a bit of a tech noob.)
I'll be changing my pads from hawk ceramics (which I run for DD) to hawk plus pads for my track day this week.
1. Do I need to "resurface" my rotors when I change my pads and how do I do it... (a bit of light sanding??) Or can I just swap and do a few quick "pad bedding" maneuvers to get my pads ready to run?
2. It's been about 6 months since my last fluid bleed. I have a few bottles of RBF 600 on hand. How do I know when I've bled out all the old fluid and have new dry fluid all the way through the lines? (I hear new dry fluid is a good safety tip to avoid boil off/fade)
I could have some brake shop do this stuff for me, but I'd actually like to start doing it at the track between heats (if i notice my pads wearing down on track weekends) and be able to swap my pads at home. (before and after track days.)
__________________
09 6spd Berk CBE, JWT cams, ZSpeed CSC, Stillen (25 row oil, brake cooling, sways, gen3 CAI), Passport (9500ci), Quaife LSD, Z1 400 hp kit, ss lines, pads, rotors, clutch etc, Phunk's pan and fuel starve fix
|