Nissan 370Z Forum - View Single Post

ANMVQ · 08-21-2014, 07:01 AM

Not to kill the FS thread but WHY not go back to the stock pulley? T sell it because of that is NUTS. An how are yo maxed out on 9 PSI. I ran that daily, sometimes saw 10( In stock trim 8 PSI pulley. I didn't have to change anything till I was at 12 PSI, and even then I was ok MAF's where fine and injectors were 93 %. Just did them to be safe?

And theres MAF"s and 750CC injectors for sale on here used for a lot less.:/

08-21-2014, 07:01 AM	#6 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Not to kill the FS thread but WHY not go back to the stock pulley? T sell it because of that is NUTS. An how are yo maxed out on 9 PSI. I ran that daily, sometimes saw 10( In stock trim 8 PSI pulley. I didn't have to change anything till I was at 12 PSI, and even then I was ok MAF's where fine and injectors were 93 %. Just did them to be safe? And theres MAF"s and 750CC injectors for sale on here used for a lot less.:/ __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda, Last edited by ANMVQ; 08-21-2014 at 07:04 AM.