11-21-2009, 08:48 PM
|
#2 (permalink)
|
|
Administrator
Join Date: Sep 2008
Location: NJ
Posts: 77
Drives: 03 Nissan 350Z CS M6
Rep Power: 10
|
Have you tried this yet?
Quote:
WINDOWS NOT WORKING PROPERLY AFTER INSTALL
If the windows do not close automatically
If the power window automatic function (closing
only) does not operate properly, perform the
following procedure to initialize the power
window system.
1. Push the ignition switch to the ON position.
2. Close the door.
3. Open the window completely by operating
the power window switch.
4. Pull the power window switch and hold it to
close the window, and then hold the switch
more than 3 seconds after the window is
closed completely.
5. Release the power window switch. Operate
the window by the automatic function to
confirm the initialization is complete.
6. Perform steps 2 through 5 above for other
windows.
|
__________________
Become a Premium Member and help support this Forum grow.
Premium Membership
|
|
|