frost

Here is a quote from another site:

I took mine off with a steam iron. It's easy. Steam the bejesus out of the stickers and pick up the corner and peel them off. Should come off in one piece. Then use 3M adhesive remover (spray) and soak the area real good. Scrub the adhesive with a brass or stainless detail brush (looks like a hellish tooth brush -auto supply item) The material is way stronger than you would think and the adhesive wipes off with a face cloth. This step may have to be repeated a couple of times.You just want to work the remover into the adhesive area and let it work. The spray evaporates quickly so load lots on . It took me about 1 hr. and the visors look great-just a very slight shadow where the stickers were.(not sticky at all) This was covered on Toyota nation or Tundra solutions website and lots of people have done it on all kinds of vehicles. Good luck! (P.S. don't smoke a fatboy while you do this -you'll blow yer eyebrows off cause of the evaporating spray!!!)
(PPS- take the visors off... way easier)

__________________
370z OG