Yikes... I've got the same plate holder. I better change the bolt to stainless. Thx. Try getting it out with an Allen wrench bit on a 3/8" drive. If that doesn't work, just drill the head off the bolt. Remove the license plate bracket, and grab the remainder of the bolt with a vise grip and remove it. You're dealing with dissimilar metals. Aluminum post and steel in the bolt plus rust. When you reassemble, use a stainless bolt with a little antiseize on it.
__________________
Berk HFC & CBE, Stillen G3, UpRev & tune by PSI, GTMat, 3M, Swift, StopTech, H&R 20/25, GT-R,
324 whp & 262 torque
|