Quote:
Originally Posted by RockLobsta
normally youd be right but in this case since the entire 1.5 inches was added to the back you do not divide anything by half because the whole additionaly 38.1mm was added all on the backside none on the front, and its only 45 not 48 because you lose 1/16th of an inch when they make the seperation cut
|
Nope. I'm 100% correct. I've widened wheels before. You're correct about the 1/16th part (or 1.5mm). So actually his offset is closer to +30 than +29.
R.K.