Originally Posted by slam1918

Z1 2 piece rotor set front & rear installed with new pads,SS lines & Moto fluid

There seemed to be some question as to the weight of the rear rotors. My bathroom scale shows a 5 lb reduction from factory to Z1.

Tip on the install. you will probably have to back off the star wheels adjuster on the emergency brake. Check the tension on the brake assembly before re mounting the tires. On the rear I used the old caliper pins as the ones Z1 sent in the kit were too long and looked silly stickin out of the caliper.

She will be getting a wheel alignment tomorrow & then brake break in.