Ok so I thought I would bring this thread back from the dead with a few updates
Ok so after tons of reading and several calculations as well as using VIP's Offsets as a guideline to what will fit at -2.5F and -2.0R camber here are some wheel widths and offsets we can run and have the same stance as VIP's Setup...
Stock:
19x9 +47
19x10 +30
VIP SETUP:
20x9.5 +20F from stock this extends out 33mm
20x9.5 +10F from stock this extends out 43mm
20x11 +21R from stock this extends out 27mm
20x12 +28R from stock this extends out 27mm
So as long as we maintain our outer extension relatively close to these numbers you can expect the same camber and tire sizes.
I am proposing a few additions to the sizing and offset club that will retain the same camber settings
Front fitments:* VIP is probably close to MAX camber in the front with their setup *
9 +4
10 +16
10.5 +23
Rear Fitments:
10 +3
10.5 +9
11 +15
12 +28
Now if you feel adventurous you can add a lil more camber to the rear and run these offsets: * this will extend your wheels in the rear 1/2" outward pushing you closer to -3 camber *
10 -9
10.5 -3
11 +3
12 +16
Discuss and let me know if you guys want more calculations or possible sizes...
