Nissan 370Z Forum - View Single Post

Joepro · 12-18-2013, 05:03 PM

I have been using the COPPER as others have said the COPPER RTV for years. Both mating surfaces must be clean, real clean. Place a good sized bead on the TP flange, then tighten it up, but not torqued down. I let it sit for an hour, then torque it down, done. NO leaks long after gaskets start leaking. 8 bucks at advance for a tube enough to do a whole exhaust.

12-18-2013, 05:03 PM	#25 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	I have been using the COPPER as others have said the COPPER RTV for years. Both mating surfaces must be clean, real clean. Place a good sized bead on the TP flange, then tighten it up, but not torqued down. I let it sit for an hour, then torque it down, done. NO leaks long after gaskets start leaking. 8 bucks at advance for a tube enough to do a whole exhaust. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group