Nissan 370Z Forum - View Single Post

Ray@Czp · 10-21-2013, 04:40 PM

ISC N1 370Z Coilovers

The N1 coilover can be lowered approximately 3 inches lower then standard ride height, this along with a spring rate setup to suit your car improves handling and stability dramatically.

32 Step Damper Adjustable
Precise control damp valve
Operates smoothly on all road surfaces
Expansion/Suppression of shock adjustment

Piston Rod Design
High rigidity steel piston rods
Meets with race/sport standards

Sports Spring
Made from high quality SAE9254 steel Tested over 500,000 times on compression inspection with less than 5% deformation.

Ride Height Adjustable
Full length height adjustable
Bound adjustable with separate spring locks
High quality T6061 aluminium alloy used for all adjustment locks to provide a lightweight design that holds spring and vehicle down force

Aluminium Bracket
Made from T6061 aluminium alloy by organic shaping to lighten weight and increase handling performance.
Specifically anodised surface to prevent inside corrosion and surface rust

Single Cylinder Design
Larger cylinder and piston design to advance driving stability and dexterity

Spring Rates:

Street Comfort / Sport:
Front: 12kg
Rear: 9kg

10-21-2013, 04:40 PM	#1 (permalink)
Ray@Czp Enthusiast Member Join Date: Jan 2013 Location: Arizona Posts: 331 Drives: 2010 370Z Rep Power: 12	NEW ISC Performance Coilovers ISC N1 370Z Coilovers The N1 coilover can be lowered approximately 3 inches lower then standard ride height, this along with a spring rate setup to suit your car improves handling and stability dramatically. 32 Step Damper Adjustable Precise control damp valve Operates smoothly on all road surfaces Expansion/Suppression of shock adjustment Piston Rod Design High rigidity steel piston rods Meets with race/sport standards Sports Spring Made from high quality SAE9254 steel Tested over 500,000 times on compression inspection with less than 5% deformation. Ride Height Adjustable Full length height adjustable Bound adjustable with separate spring locks High quality T6061 aluminium alloy used for all adjustment locks to provide a lightweight design that holds spring and vehicle down force Aluminium Bracket Made from T6061 aluminium alloy by organic shaping to lighten weight and increase handling performance. Specifically anodised surface to prevent inside corrosion and surface rust Single Cylinder Design Larger cylinder and piston design to advance driving stability and dexterity Spring Rates: Street Comfort / Sport: Front: 12kg Rear: 9kg