Quote:
Originally Posted by SPOHN
Most likely ordered. May take only two days most.
|
gah. guess im bending my own then!!!
edit: success! for anyone who strips the flare nut that goes from the hardline to the softline, go to your parts store and buy something like below. its a coated steel brake line with the following specs:
- 3/16 Inch Outside Diameter x 30 Inch Length
- SAE Inverted Flare/Metric M10 x 1.0 Thread
http://www.oreillyauto.com/site/c/de...0834&ppt=C0066
i simply cut the hardline off where the flare nut was, then used that to make a close to identical bent hardline from the driver side wheel well. you will need about 27 inches to mimic the OEM hardline, but the extra 3 inches wont hurt.