Quote:
Originally Posted by Whtfairladyz
Yes, the non-thermostatic Mocal Plate does not have a large, machined threaded hex cap on one end. Whereas a Thermostatic does. It is easy to spot. It is the only machined, shiny piece on the sandwich plate near the fittings.
If there is a leak, double check that they tightened the following: - 25mm Sandwich Plate Bolt
- adapter fittings on sandwich plate
- Hose fittings attaching to adapter fittings
Might want to also make sure that the installed did not pinch the O-ring on the sandwich plate.
Whtfairladyz aka Dustin@Z1 |
Just like the one in this picture?
http://www.the370z.com/attachments/e...7-17.56.47.jpg
__________________
'10 370z -- '09 Ducati 848 -- '05 Kawasaki 636 Track Bike -- '02 Sentra SE-R Spec V
|