Quote:
Originally Posted by teejnut
hmm... i guess drilling doesn't very appealing! haha. i'm still thinking about it. for drilling i would just need to drill a hole in the side of the door not the body? how do you guys normally seal the hole back up?
|
The door connectors are easily removed (pull down the gray hinged tab, and close the door slightly to pop the connector off). On the Base model (sans Bose), the connector on the door side has an opening to run the speaker wire. The connector on the body side will need to be trimmed out, to allow the wires to pass through. It takes about 30 seconds with an exacto knife to make this happen. Much better than using the stock wires.