Nissan 370Z Forum - View Single Post

martin82 · 05-02-2013, 01:53 PM

Ron, sorry this was on the back burner, I did not tap into the rpm signal wire, I just ordered an obd2 Wire for the racepak, got lucky and found one on ebay for $280 just now, I still need to tap into the rpm signal wire.

I also bought a steering column upper cover so I can relocate my iq3 dash in front of the stock dash.
Here's a quick chop I am removing it from the center cubby hole to here:

Also ordered one of these: Haltech IQ3 Dash Mounting Bracket Black Anodized Aluminum HT06 800 MB IQ3 | eBay

this bracket is very expensive through racepak, I found that one very cheap... or you can make your own. I won't be able to do all this until 1-2 weeks, have a time attack this weekend so getting the car prepped.

05-02-2013, 01:53 PM	#20 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 19	Ron, sorry this was on the back burner, I did not tap into the rpm signal wire, I just ordered an obd2 Wire for the racepak, got lucky and found one on ebay for $280 just now, I still need to tap into the rpm signal wire. I also bought a steering column upper cover so I can relocate my iq3 dash in front of the stock dash. Here's a quick chop I am removing it from the center cubby hole to here: Also ordered one of these: Haltech IQ3 Dash Mounting Bracket Black Anodized Aluminum HT06 800 MB IQ3 \| eBay this bracket is very expensive through racepak, I found that one very cheap... or you can make your own. I won't be able to do all this until 1-2 weeks, have a time attack this weekend so getting the car prepped.