Quote:
Originally Posted by DIGItonium
If the screen flickers as if it wants to switch over to R-CAM for no reason, then there might be loose wiring. If not, then it might be line noise which can be caused by poor grounding.
Try disconnecting the trigger wire. You'll lose the ability to switch to R-CAM, but you'll be able to confirm if it's the cause of the flicker.
|
The screen went haywire and could not see much as it was scrolling horizontal recently.i checked grounds and wires all seem in good order. Bypassed the navtool and screen is working perfect. Out comes
Navtool and going to send it back to see if they replace it.