Nissan 370Z Forum - View Single Post

cavemancan · 04-20-2013, 11:12 AM

I mean rust on the Hub face and studs. I got brand new DBA 2 piece 5000 series rotors for the front and 1 piece 4000 series for the rear. They recommend sanding down or using a wire brush to promote even wear on the rotor. They even go as far as to recommend use of a Dial indicator to see if there is any run-out of the rotors once installed. If there is it is recommended to rotate the rotor 1 lug at a time until you get the lowest run out.

04-20-2013, 11:12 AM	#49 (permalink)
cavemancan Enthusiast Member Join Date: Mar 2012 Location: Miami Posts: 302 Drives: 09 370Z TourSport MT Rep Power: 249	I mean rust on the Hub face and studs. I got brand new DBA 2 piece 5000 series rotors for the front and 1 piece 4000 series for the rear. They recommend sanding down or using a wire brush to promote even wear on the rotor. They even go as far as to recommend use of a Dial indicator to see if there is any run-out of the rotors once installed. If there is it is recommended to rotate the rotor 1 lug at a time until you get the lowest run out. __________________ Mazda Rx8 MT Titanium - SOLD! 2009 370Z T-Sport MT Black - Takeda Intake, Swift springs, Rear Camber kit, SS B Lines, FI Exhaust, Z Speed CMAK Flywheel/Clutch Kit, Stillen Brake Cooling.