Thread: Drag Racing
View Single Post
Old 04-10-2013, 03:31 PM   #3 (permalink)
StrokeThis347
Base Member
 
Join Date: Mar 2013
Location: N/A
Posts: 65
Drives: na
Rep Power: 12
StrokeThis347 is on a distinguished road
Default

Quote:
Originally Posted by Z eliminator View Post
Take your time run it with the stock set up and be safe. Get your self a good helmet.
drop the tire pressure to 25 to 27 lbs.
mine and auto and i launch at 1700 to 3200 rpm.
you should pull the brake fuse if your going to do burn outs.
the first few runs your times will be high.
it takes a lot of practice to get a good time, if you run 13.2 to 13.3 you did well.
but there could be a few 13.7's in there.
let the car cool down as high oil temps kill the time's
and if you spin and start going sideways , lift and just cruise down the 1/4 mile.

Z
Thanks! Definatly not my first time drag racing but first time racing a Z.

Is the brake fuse labeled as brake fuse?

What oil temp do you normally see a decrease in performance?
StrokeThis347 is offline   Reply With Quote