Quote:
Originally Posted by dmhenderson
I do not. I don't really like the look of the front tow hook-mounted plate without a frame. I'd like to install my other nismo frame but it's missing the bottom screw holes I'd need to make sure it's secure.
It's a metal frame so I don't want to try it with a hand drill.
|
A quick rap with a center punch and a
sharp bit will do the job. The center punch gives a good starting point and a sharp bit is not as likely to walk out of the punch dimple. If the hole is very big, drill a small pilot hole before boring out to full size. Poking at it with a dull bit is almost certain to fail.