Nissan 370Z Forum - View Single Post

pbhakta · 03-18-2013, 02:34 PM

When i installed my MirrorTap, I remember I had to use a lot of force to get those things to slip in next to the wires. I had to play around on all four sides of the Wire to see which side easily went in a little bit first, then pushed down further with force until it was in all the way. I think I even initially bent the connector prong since I was on a side that was tighter than one of the other 3 sides, but bent it back in shape tried a different side and it went in. It is a lot easier if you remove the harness from the mirror as well.

03-18-2013, 02:34 PM	#37 (permalink)
pbhakta Enthusiast Member Join Date: Dec 2011 Location: Kansas City Posts: 333 Drives: 11 GM 370z T/S 6MT Rep Power: 13	When i installed my MirrorTap, I remember I had to use a lot of force to get those things to slip in next to the wires. I had to play around on all four sides of the Wire to see which side easily went in a little bit first, then pushed down further with force until it was in all the way. I think I even initially bent the connector prong since I was on a side that was tighter than one of the other 3 sides, but bent it back in shape tried a different side and it went in. It is a lot easier if you remove the harness from the mirror as well. __________________ 2011 6MT 370Z Gun Metallic :: Stillen G3 CAI :: Swift Springs :: EvoR :: JWM LEDs :: TommyKaira :: Forgestar F14 :: Motordyne Shockwave))) E370 :: CS Spec-Me Lip :: AeroJacket