Quote:
Originally Posted by Jsolo
^^My bet is still on a failing CSC. It hasn't failed entirely in that it's able to build up some pressure, but after a while that bleeds down and you have to pump it up again.
I think your dealer's diagnosis is correct, albeit you can get it done at a better price. I'd go with the aftermarket zspeed csc which is metal, not plastic, and should last the remainder of the car's life.
To replace the CSC, the trans has to be dropped. The design on these cars is not like the older ones where the slave was externally mounted. If you're in there to do a CSC, then it makes sense to replace the rest of the clutch parts. Everything is open and right there.
Unless you've messed with the lines and have failure elsewhere, my guess is on the air entering through the failed csc seal.
In part, this was one of those things that prompted me to get the extended warranty. Nissan's powertrain coverage is a joke in context of MT's. The CSC is not a wear item, it's a part like a syncro or a gear that requires no maintenance, and should be covered. Yet it's not.
Good luck. Let us know how it turns out. Also, who ever does the work, make sure they save your old parts. It should be evident if the csc has indeed failed or not by the pics.
|
Well since you asked for an update, here it is. I replaced the CSC with the heavy duty one from ZSpeed, and also installed a new South Bend clutch kit and flywheel with it. Took myself and a buddy about 10 hours total (without a lift. That was fun!). It has only been a day since I did this, but considering that I have now replaced every part of the clutch system except the fluid reservoir and parts of the master -> CSC line, I can't imagine any problems will still exist. Thanks for the help guys!