Quote:
Originally Posted by MX52Z
Does the base of this kit (fender) require cutting the stock rubber seal like the Evo-R kit?
|
no it does not. if you go to your car and look at where the battery cover towards the front there is a black plastic pop rivit. Remove that and look through the hole and you will be able to see the top of your tire. this kit comes with a post with a ball on top of it that you place through that hole and bolt down from underneath. then you remove one bolt on the hood hinge and place the bracket on there and replace the bolt. once that is done you position the strut between the two ball posts and press into place. Repeat on the other side, remove the original hood prop and throw away and you are done.