Nissan 370Z Forum - View Single Post - DIY: Replace dreaded steering-lock on 2009s and early 2010s.

Anifaust · 01-29-2013, 06:10 PM

VRRRROOOOMMMM

Hey Nissan, nice security...I just fixed my car and bypassed your unit with my index finger. I'll be keeping my 1107.96 for myself thank you very much!

Ok, so back on track. I need to find a permanent solution for this now. I bought a little rotary tool set and a JB weld steelstick. JB takes at least an hour to cure- I don't have any sort of vice setup to clamp the bolt down either. May have to default to cutting the case open and dialing it back manually from the side. My main goal here is to keep as much outward appearance of normality though in case I want to resell it.

Suggestions at this stage? I'll see if I can upload a video from my phone of what I did tonight too.

01-29-2013, 06:10 PM	#4 (permalink)
Anifaust Base Member Join Date: Jan 2013 Location: OKC Posts: 17 Drives: '09 370Z Rep Power: 12	VRRRROOOOMMMM Hey Nissan, nice security...I just fixed my car and bypassed your unit with my index finger. I'll be keeping my 1107.96 for myself thank you very much! Ok, so back on track. I need to find a permanent solution for this now. I bought a little rotary tool set and a JB weld steelstick. JB takes at least an hour to cure- I don't have any sort of vice setup to clamp the bolt down either. May have to default to cutting the case open and dialing it back manually from the side. My main goal here is to keep as much outward appearance of normality though in case I want to resell it. Suggestions at this stage? I'll see if I can upload a video from my phone of what I did tonight too.