Nissan 370Z Forum - View Single Post - DIY: [How-To:] Racing Seat airbag light fix

VDC_OFF · 12-18-2012, 01:35 PM

My wife got to ride in my car for the first time after I installed my Bride Zeta III's. We noticed the airbag off light came on which was not supposed to happen since shes about 125-130lbs. I think you do need a small foam layer to go underneath the weight sensor so its not resting on the shell and can sink a bit to correctly measure weight change. Going to test this theory.

Another option i am considering is since the sensor was originally on top of the seat, I'm wondering if I should just take apart one of the bottom Bride cushions and put it on top as well. Problem is there are two cushions since they split in the middle so I would just have to choose one cushion to wrap it around.

12-18-2012, 01:35 PM	#80 (permalink)
VDC_OFF A True Z Fanatic Join Date: Aug 2011 Location: Houston (Pearland) Age: 44 Posts: 1,205 Drives: 2011 370Z M6 Rep Power: 16	My wife got to ride in my car for the first time after I installed my Bride Zeta III's. We noticed the airbag off light came on which was not supposed to happen since shes about 125-130lbs. I think you do need a small foam layer to go underneath the weight sensor so its not resting on the shell and can sink a bit to correctly measure weight change. Going to test this theory. Another option i am considering is since the sensor was originally on top of the seat, I'm wondering if I should just take apart one of the bottom Bride cushions and put it on top as well. Problem is there are two cushions since they split in the middle so I would just have to choose one cushion to wrap it around. __________________ DRIFTING JOURNAL \| Follow me on Instagram \| Facebook \| Houston Halos Last edited by VDC_OFF; 12-18-2012 at 01:44 PM.