Hey guys, this is a DIY on how to get a
bit more useless weight out of your car.
It can also be used to help fix 2009 hatch popping issues
There is a weight in the hatch lid to "help close" the hatch for (I'm assuming) petit women in Japan
Tools needed:
Pry tool
10mm Socket wrench
Thanks to Sh0velMan for telling me where this weight is located!
Step one: Remove the screws that hold the cargo hover to the hatch by lifting the cover:
Rotated 1.jpg
Revealing:
Rotated 2.jpg
Step two: Remove the 10mm screw
Step three: Repeat on other side
Step four: Use panel tool to pry around the hatch cover closest to you:
photo 3.jpg
There are 8, equally spaced, orange clips holding the closest edge on:
photo 4.jpg
Step five: Jam your hand in, you'll see some white clips holding the back in, (you can see two in the picture),
(DO NOT PRESS TOO HARD or yank down yet)
photo 5.jpg
Step six: Put your other hand on the glass side of the panel and pull down. you will need to jam and pull down on both sides of the hatch lock.
There are 5 (five) tabs
Rotated 3.jpg
Your panel will be off now and should look like:
photo 1 (2).JPG
Step seven: Remove the 4 (four) 10mm screws holding this box on the hatch:
photo 5 (1).jpg
Once off, it looks like this:
photo 2 (2).JPG
photo 3 (2).JPG
photo 3 (1).jpg
Step eight: Admire this stupid weight
and put the panel back on the car.
Step nine: Give rep and thanks
Drink a beer of your choice and think of how much faster you'll go from 0-60
