View Single Post
Old 10-30-2012, 02:54 PM   #1 (permalink)
pty370z
Track Member
 
pty370z's Avatar
 
Join Date: Apr 2009
Location: Panama City, Panama
Posts: 654
Drives: over the speed limit
Rep Power: 17
pty370z will become famous soon enoughpty370z will become famous soon enough
Default This does NOT seem right.. Please look..

Hi guys,

I recently had the CSC fail in my Z so I went ahead and decided to swap everything in the clutch system..

I installed:
- Z1 Motorsports Performance Clutch Kit
- Z1 Motorsports Lightweight Flywheel
- ZSpeed HD CSC with its own SS lines and stuff
- New OEM Master Cylinder (it was damaged as well)
- Motul RBF-600 clutch fluid.

I went through the clutch break-in period (I was told 800 miles, actually did around 650 miles before stepping hard on the Z again).

So, everything has been running great for the past 2k-2.5k miles until a couple of days ago I experienced (again) a loss in clutch pedal pressure.. It wasn't a full loss of pressure, probably about 50% no pressure, and then you could feel the pedal to be able to shift gears..

It happened during traffic, no hard driving at all when this happened.. After a short while, pedal feel came back to normal.. I THEN pushed the car hard for a while and everything felt normal..

I stopped to check the fluid level and I took a picture of the clutch fluid reservoir with the fluid because I think it's NOT supposed to look like this.. Fluid should be "cleaner" I believe..??

Should I flush the clutch fluid completely and refill with fresh RBF-600 again..??

I appreciate your comments on this.. Thanks!

__________________
2010 Solid Red 370Z * Touring-Sport-6MT * Black Interior
Performance: STILLEN * BERK * UR * MISHIMOTO * K&N * Z1 * ZSPEED * UPREV * DBA
Interior: GT-R Red Start/Stop Button * MSA Floor Mats * PW:JDM
Exterior: INGS+1 * SEIBON * FUJIMURA * PW:JDM * UAM * KICS * VOLK

Last edited by pty370z; 10-30-2012 at 02:56 PM.
pty370z is offline   Reply With Quote