Way too much toe in up front. Not enough in the rear. .010 toe out in front, (.020 total) .025 in on the rear. (.050) Camber seems about right for the front, consider less in the rear, these things go negative camber very fast in back once the compression starts, I actually dial some camber out so when I'm fully compressed they're around 3 degrees neg. and wear patterns are near perfect.
Oh, and definitely soften up the rear camber.
Now- how was the Fuel Starve fix?
Last edited by threeseventy; 09-17-2012 at 10:22 PM.
|