The internet is full of tutorials... I will caution you that it is a big commitment to go down this route and if you are going to go down this route and make molds and such you will have a HUGE learning curve. Spawn aero learned the hard way and it ended up with them banned on nearly every internet forum in the world. You are also in a cold weather state so expect to have issues of cold weather for much of the year... The cold weather is going to affect not only your molds but the consistency of your parts... Most beginning companies start with one to three layers of carbon depending on the part and some use fiberglass backing to save on cost...
A word to the wise it is not as easy as it looks and be prepared to do a LOT of revisions to make things look right. Also, there is a lot of consumables involved with this kind of endeavor as well.
Wrapping may be a better solution...
Mike
__________________
Shop Cars: 2013 318whp Nismo VspecII 370z *SOLD*, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054
|