Nissan 370Z Forum - View Single Post - DIY

scruffydog · 06-07-2012, 08:05 PM

Disassembling the brake calipers...

Take the brake shield off for measurement....be really careful here because a 3" diameter hose flange gets really close to the Sensor. So do fit check before cutting...

Start Dremeling away....

File down the sharp edges....

Then trace & transfer the lines & rivoting thru holes to the other brake dust shield...

Rivot it down....

Spray Paint it flat black....

Mount it back on....

06-07-2012, 08:05 PM	#20 (permalink)
scruffydog A True Z Fanatic Join Date: Jan 2009 Location: Nor Cal Posts: 1,113 Drives: with his eyes close Rep Power: 717	More pictures... Disassembling the brake calipers... Take the brake shield off for measurement....be really careful here because a 3" diameter hose flange gets really close to the Sensor. So do fit check before cutting... Start Dremeling away.... File down the sharp edges.... Then trace & transfer the lines & rivoting thru holes to the other brake dust shield... Rivot it down.... Spray Paint it flat black.... Mount it back on....