Then I hooked up the wires to the switches.
I got the sames switches from the original thread on here. I'll try to find that thread and link it in here later.
(Got it, here's the link)
Switch Panel on console
The switches pretty much drop in, but the outer right and left ones do need some slight sanding to the outside edges to make them more curved.
The last pic here shows the bottom side of the drink holder assembly with the switches all installed.
The center switch is just a dummy. I originally thought I would make this my DVD / parking brake override, but unlike Kenwoods, my JVC radio is "dumb" and just let me permanently ground that wire.