Nissan 370Z Forum - View Single Post

Yutnaka · 04-26-2012, 11:24 PM

I have a different brand, but it took less than 30 minutes for both sides without the strut bar taken out. I first inserted on the throttle body and then attach it from the bottom up to the maf sensor tube. It helps if you have a flat head to help guide it over the the maf tube once the bottom part of the tube is on the maf part. Maybe this might help. The breather tubes are much easier if you just take them out and install them very last.

04-26-2012, 11:24 PM	#7 (permalink)
Yutnaka Base Member Join Date: Apr 2011 Location: Columbus, GA Posts: 212 Drives: 2011 370z 7at GM Rep Power: 14	I have a different brand, but it took less than 30 minutes for both sides without the strut bar taken out. I first inserted on the throttle body and then attach it from the bottom up to the maf sensor tube. It helps if you have a flat head to help guide it over the the maf tube once the bottom part of the tube is on the maf part. Maybe this might help. The breather tubes are much easier if you just take them out and install them very last. __________________ Z1 Test Pipes, AAM S-Line Midpipe, Nismo Axleback, Takeda CAI, JDM fog light, Avant Garde M310 matte black, Tein springs, uprev 310whp-SOLD!