Quote:
Originally Posted by Gauge
If I wanted to do the nissan emblem with the Nissan part cut out as well, but not damage the emblem, anyone have any good ideas? I'm not sure the edge on the nissan lettering is sharp enough that it will peel off.
The ultimate would be if I could do it black but have the lettering be white. Any suggestions before I go through with all black would be appreciatted.
|
First tape off the area around what you want to "Dip". Four or five good coats of black first. Wait a day so it can dry. Then painter's tape over the whole emblem and cut out the "NISSAN" with an exacto knife. Then four or five coats of the color you want the "NISSAN". Look at pictures below...