View Single Post
Old 02-23-2012, 11:43 AM   #31 (permalink)
Motordyne
Enthusiast Member
 
Motordyne's Avatar
 
Join Date: Nov 2008
Location: Los Angeles
Posts: 384
Drives: Z
Rep Power: 16
Motordyne is on a distinguished road
Default

Quote:
Originally Posted by Juruki View Post
from some of the pictures i can see ground clearance is good.
Where are the lowest parts of the exhaust? Are the exhaust pipes the lowest parts of the car in some places?
car and exhaust looks good btw!
Excellent question.

The lowest point of the exhaust is exactly under the rear axle where you can only bottom out so much before the suspension hits the stops and all other remaining clearance is determined by the fixed wheel diameter.

If the lowest point of the exhaust is anywhere fore or aft of the rear axle that low point quickly becomes more vulnerable to scraping. There would be a loss of clearance by extrapolating that same low point to other parts of the car while going over a speed bump for example. So that is exactly what we didn't do.

When ground clearance is an important issue, put the lowest point directly under the rear axle and then make it as high as possible. And that's exactly what we did with the Shockwave))).

Last edited by Motordyne; 02-23-2012 at 11:56 AM.
Motordyne is offline   Reply With Quote