Quote:
Originally Posted by Equinox
Thanks AK370Z for the write up, I used this info to install my Kenwood DNX9140 last night and it went pretty smoothly. The only odd thing I noticed is the mount that holds the stock radio - and that you have to re use and screwonto the aftermarket one - it is screwed on with TORX screws. I ended up using 7/64" allen wrench to take the screws out since I didn't have a TORX head screwdriver.
|
This surprise almost ruined me.
I didn't have a set of Torx drivers so I tried my regular screwdriver. I managed to get all but one screw out, but the last one twisted the head of the screwdriver. Luckily a friend was able to bring his torx stuff by so I could finish it up. I took a ton of pictures with the intention of creating a guide since I felt that both of the existing guides were missing something. One of these days I'll get around to finishing it up.