View Single Post
Old 09-08-2011, 12:43 PM   #14 (permalink)
Vince@R/T
Base Member
 
Join Date: Mar 2011
Location: Lansdale PA
Posts: 87
Drives: 99 GS400
Rep Power: 14
Vince@R/T has a spectacular aura aboutVince@R/T has a spectacular aura aboutVince@R/T has a spectacular aura about
Send a message via AIM to Vince@R/T
Default

Quote:
Originally Posted by Megan370z View Post
on my car and my Innovate AFR gauge ,, Cipher read about .3-.5 AFR richer depending on the RPM than the aftermarket sensor

example;
Cipher @ 7000 rpm = 12.9
AFR sensor @ 7000 rpm = 13.4
These are the same results I have found as well. Also with boosted cars they are scaled off a lil further then that actually. For whatever reason on the 370's Nissan switched back to a 4 wire wideband which isn't as accurate as a 5 wire in my experience.

Quote:
Originally Posted by tjaartk View Post
Hi Guys, my Cipher software gives me a voltage output instead of the actual AFR, do you know how to get Cipher to show the AFR instead of the voltage?
That is probably because UPREV does have your ROM converted yet to set up the A/F Sensor scaling in cipher.


As far as the OP goes, I have seen stock Z's dip down that rich close to redline. If interested we offer E tuning and can get you tuned via E tuning and take care of the air fuel issue.
Vince@R/T is offline   Reply With Quote