Nissan 370Z Forum - View Single Post

MattP725 · 08-31-2011, 02:56 PM

Question for the suspension guys...

I just installed my oil cooler (haven't even fully ran the car yet) and the plate fitting is only about an inch from the sway bar HOWEVER it is close when there is no load on the wheel (car is jacked).

Obviously the center of the bar will be pressed down once the wheels have weight on them...

My question is how much travel is there towards the center of the bar... could it ever feasibly exceed the top position when the car is jacked up? I would think not unless there was force pushing the wheels down even further.

08-31-2011, 02:56 PM	#1 (permalink)
MattP725 A True Z Fanatic Join Date: May 2011 Location: Toms River, NJ Posts: 1,904 Drives: 2010 40th Rep Power: 16	Stock sway bar movement... Question for the suspension guys... I just installed my oil cooler (haven't even fully ran the car yet) and the plate fitting is only about an inch from the sway bar HOWEVER it is close when there is no load on the wheel (car is jacked). Obviously the center of the bar will be pressed down once the wheels have weight on them... My question is how much travel is there towards the center of the bar... could it ever feasibly exceed the top position when the car is jacked up? I would think not unless there was force pushing the wheels down even further.