Nissan 370Z Forum - View Single Post - Gauge sensor and Greddy plate thread sizing

SPOHN · 07-30-2011, 04:49 PM

This is what I have.
Greddy - Oil Filter - Adapter Plate - Nengun Performance

Yea I've tried it everyway. The plate also has a M12x1.25 bolt in it. And I can find a M12x1.25 to 1/8 NPT fitting ($15). Edit. Found it for $7 on Ebay.
http://www.powerflowperformance.com....le-p-2197.html

But was thinking of just tapping it. But need to know if it's ok to tap what I think now is a 1/8 NPS to a 1/8 NPT. Being NPT is taperd you would be going bigger, right?

This is what I have. Part number is back at my shop.

07-30-2011, 04:49 PM	#5 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	This is what I have. Greddy - Oil Filter - Adapter Plate - Nengun Performance Yea I've tried it everyway. The plate also has a M12x1.25 bolt in it. And I can find a M12x1.25 to 1/8 NPT fitting ($15). Edit. Found it for $7 on Ebay. http://www.powerflowperformance.com....le-p-2197.html But was thinking of just tapping it. But need to know if it's ok to tap what I think now is a 1/8 NPS to a 1/8 NPT. Being NPT is taperd you would be going bigger, right? This is what I have. Part number is back at my shop. __________________ Last edited by SPOHN; 07-30-2011 at 04:54 PM.