Nissan 370Z Forum - View Single Post

dwntwnall4u · 05-05-2011, 09:21 PM

Thanks for the DIY write up. Really ready to do.
Removing the screws on the undershroud took longer then replacing three sway bar.
Did mine on my Race Ramps.
The larger bolt on the tie rod is a 19mm.

Only issue is I can't remember how my Z felt stock, since I have only driven it 1100 miles so far. I have the Stillen sways both set to the softest settings. My Z seems to have more body roll?

05-05-2011, 09:21 PM	#23 (permalink)
dwntwnall4u Base Member Join Date: Dec 2010 Location: San Diego/ Hawaii Posts: 158 Drives: 2011 370Z AT,S,T,PW Rep Power: 14	Thanks for the DIY write up. Really ready to do. Removing the screws on the undershroud took longer then replacing three sway bar. Did mine on my Race Ramps. The larger bolt on the tie rod is a 19mm. Only issue is I can't remember how my Z felt stock, since I have only driven it 1100 miles so far. I have the Stillen sways both set to the softest settings. My Z seems to have more body roll? __________________ Working my *ss off for a GTM Rotrex SC to go with my 2006 URD Rotrex SC 4x4 Tacoma.