Nissan 370Z Forum - View Single Post

shoopajae10 · 04-15-2011, 09:31 PM

Flushnimso, what are your specs for front/rear camber/toe/caster?

I just installed spc rear cambers too but without the toe bolt because i didn't have the equipment to extend the hole with a grinder. if i have too much negative camber on the rear right now, do i need to install the toe bolts to get it closer to -1/0 camber?

I was thinking the toe bolts would not matter and have nothing to do with the camber since it adjusts the toes only. Right now im maxxed out on the rear with kw v3s with 25mm spacers too. my toe is in spec with factory toe bolts.

04-15-2011, 09:31 PM	#23 (permalink)
shoopajae10 Track Member Join Date: Oct 2009 Location: Over Yonder Posts: 650 Drives: A White Sports Car Rep Power: 16	Flushnimso, what are your specs for front/rear camber/toe/caster? I just installed spc rear cambers too but without the toe bolt because i didn't have the equipment to extend the hole with a grinder. if i have too much negative camber on the rear right now, do i need to install the toe bolts to get it closer to -1/0 camber? I was thinking the toe bolts would not matter and have nothing to do with the camber since it adjusts the toes only. Right now im maxxed out on the rear with kw v3s with 25mm spacers too. my toe is in spec with factory toe bolts. Last edited by shoopajae10; 04-15-2011 at 09:36 PM.