Nissan 370Z Forum - View Single Post - I don't normally powdercoat wheels, but....

ZPirate · 03-31-2011, 12:57 PM

Mike,

I received the Nismo vinyl pieces today. What is the best way to put them on?

I did one wheel while I was home at lunch. I cleaned the surface first with water and a cloth. Then I dried it with another cloth. Next I applied a lite mist of water so that I could move the vinyl pieces around once I put them on the wheel. Once I got them in place I padded them dry with a cloth. Would using a hair dryer rather than a mist of water help the process? Thanks for your assistance.

03-31-2011, 12:57 PM	#84 (permalink)
ZPirate Track Member Join Date: Dec 2008 Location: Greenville, NC Posts: 792 Drives: 09' 370Z & 03' 350Z Rep Power: 17	Mike, I received the Nismo vinyl pieces today. What is the best way to put them on? I did one wheel while I was home at lunch. I cleaned the surface first with water and a cloth. Then I dried it with another cloth. Next I applied a lite mist of water so that I could move the vinyl pieces around once I put them on the wheel. Once I got them in place I padded them dry with a cloth. Would using a hair dryer rather than a mist of water help the process? Thanks for your assistance. __________________ 2003 Daytona Blue 350Z Touring/Nismo 2009 Platinum Graphite 370Z Touring/Sport (Sold) 2009 BMW 135i/Dinan Stage 2 software upgrade/M3 suspension piecies/Koni Sports/ETS FMIC/Alufelgen SF-71 wheels